FDDI (Fibre Distributed Data Interface) are dual-redundant 100 Mbit/s links with 4B/5B signalling over multimode fibre media or MLT-3 signalling over copper UTP media (CDDI (Copper Distributed Data Interface)).
The FDDI and CDDI Adapters are available in the following range of industry standard compliant formfactors :
Architecture
The FDDI and CDDI Adapters use the AMD Supernet 3 chipset. This chipset offers advanced features such as Synchronous Bandwidth Allocation (SBA) and End Station Support (ESS). The adapter has an advanced ASIC onboard that performs buffer management and PCI interfacing, thereby achieving high throughput.
Features
Applications
|
Specifications |
|||
Bus Interface |
32-bit,
33/66 MHz |
||
|
I/O Addresses |
Automatically assigned to the slot by PCI Rev. 2.1 Plug-and-Play |
||
|
Interrupts |
PCI INT A |
||
|
LAN Controller |
AMD Supernet 3 |
||
|
Network Interface |
FDDI |
: ANSI X3T12, ANSI X3.139 and ANSI
X39.5 |
|
|
Flash EPROM |
128 kBytes |
||
|
I/O Options |
FDDI : |
Front Panel or rear facing I/O |
|
|
Power Requirement |
5,0 V at 1,45 A |
||
|
Software Drivers |
Various software drivers offered including for VxWorks, Linux, LynxOS, Solaris, DOS, OS/2, Windows(95, 98, NT, 2000, XP and 2003) operating systems as standard; others are costed options |
||
|
Supporting Software |
Hardware Diagnostic Program for DOS |
||
|
Special Optional Services |
Synchronous Bandwidth Allocation (SBA) and End Station Support (ESS), Built-in Test (BIT), Network Time Protocol (NTP), Network Time Services (NTS) |
||
|
Physical Characteristics |
|||
|
Formfactor |
|
Dimensions |
Mass |
|
PMC (IEEE Std 1386.1-2001) |
FDDI |
149,00 mm x 74,00 mm (+0,0 / -0,5 mm), conforming to CMC height envelope |
105 g ± 10 g |
|
CDDI |
125 g ± 10 g |
||
|
CCPMC (ANSI/VITA 20-2001)
|
FDDI |
143,75 mm x 74,00 mm (+0,0 / -0,5 mm), conforming to VITA 20 height envelope |
105 g ± 10 g |
|
CDDI |
125 g ± 10 g |
||
|
PCI-104 (PCI-104 v1.0)
|
FDDI |
95,89 mm x 90,17 mm x 23,80 mm (+0,0 / -0,5 mm) |
110 g ± 10 g |
|
CDDI |
130 g ± 10 g |
||
|
PCI (PCI Local Bus Specification Rev. 2.1)
|
FDDI |
175,26 mm x 106,68 mm x 15,24 mm (+0,0 / -0,5 mm)
|
125 g ± 10 g |
|
CDDI |
145 g ± 10 g |
||
|
Reliability |
||||
|
MTBF
|
Figures according to MIL-HDBK-217F, Parts Stress Method |
|||
Ground, Mobile
|
Tj = 65 C |
Ta = 45 C |
20 000 hrs |
|
|
Environmental Specifications |
|||
|
|
Commercial Grade |
Industrial Grade |
Ruggedised/Conduction-Cooled Grade |
Temperature |
|
|
|
Humidity |
0% - 90% |
0% - 95% |
0% - 95% |
|
Shock |
N/A |
30 g peak for 11 ms |
40 g peak for 11 ms |
Vibration |
|
|
|
|
Part Selector |
|||||
|
Part Number |
Formfactor |
Grade |
Attachment |
Media |
Connector |
|
CCII/FDDI/PMC/DAS/ST/COM CCII/CDDI/PMC/DAS/HR10/COM CCII/FDDI/PC104/DAS/ST/COM CCII/FDDI/PC104/DAS/RJ45/COM
CCII/FDDI/PCI/DAS/SC/COM |
PMC PMC PCI-104 PCI-104
32-bit PCI |
Commercial Commercial Commercial Commercial
Commercial |
Dual Dual Dual Dual
Dual |
Fibre Copper Fibre Copper
Fibre |
ST HR10 ST RJ-45
SC |
| Note : At 10,5 mm, the SC connectors are taller than the PMC formfactor allows. This causes a slight mis-alignment of about 0,5 degrees, or 0,1 mm at the PMC connectors. Users are advised to establish whether this is a problem in their application, in which case we would recommend using FDDI adapters with ST connectors. | |||||
CFDSS001/2 Rev. 2.5 - 2017-10-24
CCII Systems (Pty) Ltd • P.O. Box 171 • Rondebosch
7701 • South Africa
Telephone : (+27 21) 683 5490 • Facsimile : (+27
21) 683 5435 • WWW : www.ccii.co.za